Operation And Maintenance; Before First Use - Tristar BO-2104 Manual De Usuario

Instruction manual

OPeRATION AND MAINTeNANCe

• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Never use the appliance near a sink filled with water or other liquids.
• If the device has fallen into the water never try to hold it, but pull the
plug from the socket.
• Never use the device for opening cans of flammable liquids.

BeFORe FIRST USe

Attach the lever (No. 1) on the unit standing by sliding the shaft in the hole
above the control wheel (No. 2) of the device. Attention! The blade of the
lever is very sharp.
USe
• Turn the lever (No. 1) up and put the can under the retainer axis and
against the control wheel (No. 2). Push the lever down and pierce the
can, the machine will start working now. Keep pushing on the lever,
the device will automatically stop when the lid is fully opened.
• Grab the can and lift the lever to remove the tin.
• Please ensure that you do not cut yourself when you remove the lid,
the lid is very sharp.
• The size of the can opener is also suitable for opening high cans.
4
All manuals and user guides at all-guides.com
• Place the can opener on the edge of the work surface and hold it firmly,
USe OF THe GRINDeR
• Make sure that the blade is clean and not oily to prevent to grinding
• Do not attempt to sharpen serrated knives! Uneven polishing can be
• Place the blade (near the handle) into the opening of the knife
• Repeat 4-5 times until the knife sharpening.
CleANING
• Unplug the appliance from the socket.
• Remove the lever (no. 1) of the machine and clean it with warm water.
• Never immerse the appliance in water or other liquid.
• Clean the outside of the appliance with a damp cloth and dry it with a
to avoid tilting the device.
wheel to be dirty.
avoided by not pushing too hard on the knife during sharpening. Hold
the lever (No. 1) down to switch on the device.
sharpener (No. 4) until it touches the grinding wheel. Pull the knife
slowly toward you through the opening.
Dry thoroughly before replacing. Attention! The blade of the lever is
very sharp.
soft, clean cloth. Never use abrasives.