Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Massage nodes rotating at
reduced speed.
Device switches off
suddenly
Device fails to start
Jerky motion of massage
nodes/vibrations from device
Infra-red lights are on but no
motion from massage nodes
TROUBLESHOOTING
Possible cause
The load on the massage
heads is excessive.
Device has been in use for 15
mins. Auto shut-off function is
activated.
Over-heat protection function is
activated. Device is switched off
for your safety.
Check if device has been used
for more than 15mins.
The battery is low.
The device is not properly
plugged.
Excessive pressure may have
been applied onto the device.
Device may be jammed.
10
Solution
Reduce load and try again.
Let device rest for 15mins
before continuing. Device may
require longer time to cool in
warmer environments.
Please rest the unit for 15- 30
mins before restarting.
Let device rest for 15mins before
continuing.
Device may require longer time
to cool in warmer
environments.
Please charge the unit.
Check if adapter is properly
plugged into socket and
adapter output is connected to
device power inlet wire.
Reduce the load and try again.
Remove pressure / load from
the device and press the ON/OFF
button to try again.
Publicidad
