Publicidad
Idiomas disponibles
Idiomas disponibles
battery is not installed or is depleted the
USB plug will not provide power.
DRIVETRAIN
Drive Motor
The drive motor is mid-mounted with
placement near the pedal crank assembly.
An electronic torque sensor automatically
recognizes the pressure the rider applies to
the pedals and instantly provides a
proportionate amount of electric drive
assistance.
18
Belt Drive
The drive motor is connected to the rear
wheel assembly with a carbon fiber-
reinforced drive belt (similar to motorcycle
drive belts). The drive belt provides
smooth, quiet, and low-maintenance
operation.
Continuously Variable
Transmission
Your eBicycle may come equipped with an
electronically controlled CVT (Continuously
Variable Transmission) on the rear hub
that delivers seamless gear changes and
transmission of power at any speed. There
is no shifting required; the transmission
automatically adjusts the gear ratio as
terrain or speed changes. The
transmission is fully enclosed without any
exposed components and requires no
maintenance.
DISPLAY
Every eBicycle includes a display attached
to the left handlebar. The display directly
controls the eBicycle when utilizing the
battery powered components. It will not
function without battery power but is not
needed to use the eBicycle as a traditional
bicycle under pedal power only.
Ergonomically arranged thumb-and-
forefinger controls on all models allow the
rider to operate the displays without lifting
a hand off of the handlebar.
The Power button is located on the back
side of the display. To turn the bike on or
off, press and hold the Power button for at
least 1 second before releasing.
Publicidad
