Descargar Imprimir esta página

Start-Up And Operation - Hama MagCharge Car FC15 Instrucciones De Uso

Ocultar thumbs Ver también para MagCharge Car FC15:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15

4. Start-up and operation

Note
• Please be aware that this wireless car charger is only suitable for Apple smartphones of the latest
generation that support magnetic, wireless
charging.
• Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the
back of your device may interfere with or even prevent the charging process.
Note – 12 V, 24 V vehicle electrical systems
The charger is suitable for 12 V and 24 V vehicle electrical systems.
• Fit the grating holder (4) to the wireless "MagCharge Car FC-15" car charger by loosening the nut (3) on
the charger and loosely placing it over the ball joint on the grating holder (4). Then gently press the ball
joint into the mount for the grating holder (4) and screw the nut (3) slightly.
• Open the locking lever (5) and fit the clamp of the grating holder (4) to the grating on your car. As soon
as the desired position has been reached, close the locking lever (5) to secure it.
• Connect the USB-C input (1) on the connecting cable with the enclosed car adapter for the power
supply (6).
Note
The maximum charging power of up to 15W is only achieved with a Power Delivery (20W) car adapter
(5V/3A, 9V/2.22A, 12V/1.67A) which is included in the extent of delivery.
Warning
• Only use suitable charging devices or USB ports to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Place the back of your Apple smartphone on the wireless car charger. It attaches automatically thanks to
the integrated magnets. (Figure B)
• Adjust the position of your smartphone to your requirements and then tighten the nut (3)
• The charging process begins as soon as an effective induction field has been established. The current
charge status is displayed on your device.
• The charging process ends automatically once your device's battery is fully charged.
Note - car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been
switched off. You should therefore disconnect the product from the line connection when not in use to
protect your car battery from being drained.
4

Publicidad

loading

Este manual también es adecuado para:

00201697