NORAUTO 2389388 Manual página 34

INFLATING FUNCTION
EN
1. Connect the 12V power cord into DC 12V power outlet. Or, if the inflator is charged, use the
rechargeable battery.
2. Screw the air hose to tire air valve by twisting it clockwise until it is securely attached to the tire
air valve.
3. Press pressure unit button to select PSI, BAR or KG/CM2.
4. Press +/- button to set desired pressure. Press the inflating switch to start inflating. The inflator
will automatically shut off once the pre-set pressure is reached.
5. Remove the quick connector from the tire and screw the valve cap.
Note: The original display is set 2.5 BAR.
Note: The cables should be straight, net and in correct direction. If the cable is stuck, do not wind.
Try to pull it out and make the cable tidy and wind again.
32
PSI BAR KG/CM²