Hardware List; Assembly Instructions - belavi 22634-22 Manual Del Usuario

A
B
C
D
E
6

Hardware List

STEP 1:
Set the Seat (A) upside down on a soft, non-abrasive surface.
Set the Leg Frame (B) on top of the Seat (A) as illustrated above. Insert
four Bolts M6x20 (C) with Washers (D) through each eyelet on the Leg
Frame (B), and into the bolt-threading found underneath the Seat (A).
Tighten bolts using Hex Key (E). Turn the chair right-side up and set
the seat and back cushions in place. The chair is now ready to be used.

Assembly Instructions

E
C
D
7