Fan Assembly; Care And Storage - HJM FE-30 Instrucciones De Uso

Ventilador Alta Pot. FE-30,40,45

FAN ASSEMBLY

1. Install the U shaped tube to the height adjustment tube using screws.
2. Install the support tube to fan main body using screws.
OFERATION
1. Set your fan on a level dry surface.
2. Plug the power cord into a standard 220~240 V wall outlet.
3. To operate your fan, turn the control knob to the desired fan speed Low(1),Med(2)High(3)
4. Adjust the fan head to your desired angle.
Part list

CARE AND STORAGE

1. Turn the control to OFF and UNPLUG THE FAN BEFORE CLEANING.
2. Use only a soft damp cloth to clean the fan.
3. DO NOT immerse the fan in water and never allow water to drip into the motor housing.
4. Do not use gasoline, paint thinner or other chemicals to clean the fan.
5. Store the fan in its original box or cover the fan to protect it from dust.
Store it in a cool dry place.
27/12/11 10:12 Página 10
1.
2.
3.
4.
5.
6.
7.
- 10 -
MAIN BODY
SCREWS
LEFT SUPPORTER
SCREWS
TUBE
RIGHT SUPPORTER
SWITCH BOX
E
N
G
L
I
S
H