Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Heating barrel
2.
Display
3.
Temperature setting button (+)
4.
Temperature setting button (-)
WARNING! The surfaces of the appliance are liable to get hot during use and
will stay hot for some time after operation. Only touch the appliance by the
handle. Keep the heating barrel (including the insulation tip) well away from
your body or head skin and do not keep it on your hair for too long.
NOTE: Always ensure your hair is clean and tangle-free before using the
appliance.
NOTE: The appliance features an automatic switching-off function. It switches off
automatically after continuous operating for approx. 1 hour.
NOTE: During the operation, if the NTC (negative temperature coefficient) is short-
circuited and the heating barrel does not heat up, the display shows "E01" after approx. 30
seconds. If the NTC (negative temperature coefficient) is open-circuited and the heating
barrel stops heating up after approx. 90 seconds, the display shows "E02".
— Adjust the heating barrel to the desired position (90° / 135°
/ 180°).
— Connect the appliance to the power supply.
— Keep pressing the on/off button for approx. 1 - 2 seconds
to switch on the appliance. The display shows the default
temperature setting 180 °C and the running indication
— Press the "+" and "-" buttons to select the desired heating
temperature (120 °C / 130 °C / 140 °C / 150 °C / 160 °C /
170 °C / 180 °C / 190 °C / 200 °C / 210 °C).
— The temperature of the heating barrel starts to increase
instantly. The set temperature and running indication
— If no operation after the appliance is switched on / the temperature is set, the buttons will
be locked automatically in approx. 4 seconds. The symbol is indicated on the display.
Keep pressing the "-" button for approx. 1 - 2 seconds to unlock the buttons. The symbol
disappears from the display.
— After the heating barrel reaches the set temperature, the indication / / /
be constantly indicated on the display.
— Hold the appliance on the handle. Roll a strand of hair (approx. 5 cm in wide, not too
thick) onto the heating barrel for approx. 5 - 8 seconds. Make sure not to keep the
heating barrel on your hair for too long.
— Repeat the same operation over the entire strand of the hair.
— Let the hair cool down before styling it further.
— When the operation is finished, keep pressing the "-" button for approx. 1 - 2 seconds
to unlock the buttons and then the on/off button for approx. 1 - 2 seconds to switch off
the appliance.
— Disconnect the appliance from the power supply. Place it on a heat-resistant surface to
let it cool down.
— Before cleaning, unplug the appliance and let it cool down completely.
— Do not clean the appliance with steel wool, strong chemicals, alkali, abrasive or
disinfecting agents as they may damage its surface.
— Do not immerse the appliance in water or other liquids to clean it. Make sure that the
electrical parts do not become wet or damp.
— Remove any hair left on the appliance, especially on the heating barrel.
— Clean the appliance with a soft damp cloth and, if necessary, a little mild detergent. Wipe
with a dry soft cloth.
— The appliance may only be used again after it is dried completely.
— Before storage, always make sure that the appliance is completely dry and cooled down.
— Store the appliance in a cool, dry place, protected from moisture and out of the reach
of children.
PRODUCT OVERVIEW
1
2
INSTRUCTIONS FOR USE
CLEANING
STORAGE
3 45
6
5.
On/off button
6.
Handle
7.
Power cord with plug
.
are indicated on the display.
6
7
/
will
Publicidad
