Fastening For Profile, Front Panel, Control Panel; Disassembling The Decorative Element - BKS G-U B-55600-13-4-6 Instrucciones De Montaje

3.4.2 Fastening for profile, front panel, control panel

3.5

Disassembling the decorative element

Using a screwdriver, tighten the screws
until the finger scanner is secure.
Do not tighten too much, otherwise the
housing may be destroyed.
When the screws are tightened, the
snap-in noses move outwards and snap
the finger scanner into place in the
profile and the front panel.
Finally, snap the decorative element
including the gasket for external use into
place.
A notch is located on the underside
of the decorative element. Lift the
decorative element upwards using
a screwdriver, for example, until the
locking catches are released. Lift the
decorative element upwards slightly and
pull it outwards at an angle.
Attention: In the process, be careful not
to damage the surface of the door!
13