Publicidad
Idiomas disponibles
Idiomas disponibles
Repair / maintenance
Disconnect the power supply (disconnect battery terminals) and relieve the pressure on the
system by opening the nozzle before carrying out any repair or maintenance work.
Regularly check the pressure-carrying parts (delivery hose) and the live parts for possible
damage. Replace defective parts immediately with original parts.
The use of non-original accessories, e.g. hose lines, connections, may entail the risk of accidents
in individual cases. No liability can be accepted for accidents and damage caused by third-party
parts.
Conversion or modification of the system is only permitted after consultation with the
manufacturer.
The operational safety of the unit is only guaranteed if it is used as intended.
Maintenance, inspection and repair work may only be carried out by qualified personnel.
Caution: hot components only cool down gradually after switching off.
2
Intended use / warranty:
The electric diaphragm pump is suitable for transferring and filling AdBlue urea solutions, water
and antifreeze.
Flammable liquids (petrol, diesel), solvents and liquids with a viscosity > 20 cSt must not be
conveyed with the pumps.
Any other use, as well as conversion or modification of the system is only permitted after
consultation with the manufacturer.
We are subject to the scope of the statutory warranty obligation (see our terms of delivery) If the
operating instructions are observed and the system is used as intended.
In case of warranty claims, please include your invoice together with the date of purchase
3
Scope of delivery:
The individual components are shown on page 8.
4
Commissioning and operation:
- The MT-AdBlue 75 L mobile tank system is delivered ready for operation.
Before putting the system into operation, check all connection points for firm seating and
tightness
- Connect the battery terminals.
- In regards to the 12V version, first connect the + pole and then the - pole to the battery.
- Ensure that the pump is switched off.
- The pump is now ready for use.
5
Maintenance and care:
The electric diaphragm pump is maintenance free.
Regularly check the pressure-carrying parts (pressure hose and nozzle) and the live parts of the
pump for possible damage or wear.. Replace defective parts immediately with original parts.
In order to avoid crystallization of the urea solution in the pump, the system must be completely
emptied and rinsed with a neutral liquid (water) when not in use for 2 weeks or longer.
Ordering spare parts:
When ordering spare parts, the following information is required:
Type specification, designation of the ET, order number
10
MATO
GmbH & Co. KG
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:00 49(0)6108-906-0 / Fax: 00 49(0)6108-906-120
Operating instructions
MT-AdBlue 75 L
Publicidad
