Error Indicator; Internal Features - EcoFlow Home Panel Manual De Instalación

5. IOT Reset Button and Indicator
This button can be used to turn on the Bluetooth hotspot for 5 minutes for the user to connect.

6. Error Indicator

This indicator is normally off if no fault is present inside the SHP. It will turn red if there is a fault in
the product. Users can go to the app for a fault diagnostic report. If there is an issue, please contact
customer support for assistance.
7. Power Station Pause/Resume Button
The pause button will physically isolate the 10 load circuits and lock out both connected DELTA Pros.
A signal from the SHP will tell the DELTA Pros to stop outputting power. Please note that this does not
substitute for a service disconnect, nor does it substitute for the de-energization procedure required
before servicing.
NOTE
This is the only "quick disconnect" that can be used to manually cut all power in an emergency.
AC in and Pro in still energize.

3.2 Internal Features

2
8
4
5
1
9
3
7
6
EN
4