Cleaning And Maintenance - Duronic BG200 Instrucciones De Uso

It is essential to keep your grinder clean so that you can enjoy the best results
every time you use it.
Coffee beans contain oils that will naturally collect in the grinder, particularly
around the blade, and these can quickly become stale. The stale oils and residue
can taint the taste of anything else you grind in the grinder, so it is important to
clean the removable parts regularly.
Switch off and unplug the grinder before cleaning.
1. To clean the motor unit, wipe the machine body with a well-wrung wet cloth.
Dry with a dry cloth or leave to air dry.
2. To clean the removable parts (the bean cup, ground container cup and lids),
remove them from the grinder base and wash by hand with warm soapy water
and a soft cloth.
3. Dry all parts properly before placing them back into the machine or before
storing away.
Periodically you may wish to clean the burr blades. Remove them from the
grinder base and wash by hand with warm soapy water and a soft cloth. It is very
important to ensure that they are completely dry before placing them back into the
grinder base.
CAUTION:
• Be careful when cleaning the burr blades as they are sharp and can
cause injury!
• None of the parts should be washed in a dishwasher OR
submerged in very hot water.
• Do not reassemble the grinder when parts are wet as this may
create a fire hazard. Ensure each part is dry before reassembling or
storing away.

Cleaning and Maintenance

14