List Of Parts; Facility - Create FRIDGE STYLANCE Manual Del Usuario

1. Control Panel
2. Glass shelves
3. Vegetable drawer
4. Freezer drawers
5. Door racks
• Take the product out of the package and remove the adhesive tape that protects the door
and the equipment.
Note. Remaining adhesive stains can be removed with a mild washing agent.
Caveat. The refrigerator should be kept away from high temperatures, sunlight or humid con-
ditions.
• Make sure the refrigerator is leveled in an upright position for 2 hours before connecting
the appliance to a power source, this will reduce the possibility of a malfunction in the
cooling system.
• Do not tilt the refrigerator more than 45° upright when moving it.
• Do not apply force to any part such as the condenser, door and its handle to prevent the
refrigerator from being deformed, or its performance will be affected.
• The refrigerator must be placed on a flat, firm and stable surface. If it needs to be lifted,
use a stable and solid pad. Never use packing foam as a pad to raise the refrigerator.
• Make sure to place the appliance in a horizontal position by screwing the 2 front adjustable
feet.
• Do not place the refrigerator in an area exposed to moisture or splashing water.
Note. Water splash or dirt on the refrigerator should be removed in time with a soft cloth to
prevent rust and deterioration of electrical insulativity.
• Do not place the refrigerator in an environment below 5ºC, or use it in the rain.
• The refrigerator should be kept away from the heat source and protected from sunlight, to
avoid influencing the normal operation of the refrigerator.
• The appliance is only applied with 220~240V/50Hz single-phase alternating current power
supply. The device uses a grounded wall plug in accordance with current recommenda-
tions.
E NGL I SH
8

LIST OF PARTS

1
2
3
4

FACILITY

5