Power Connection; Assemble/ Disassemble Presser Foot - Premier MCO-5199 Manual De Instrucciones

Power Connection
Before power is connected, the voltage and
frequency shall be confirmed to be in compliance
with those on the nameplate.
Power shall be connected as right figure indicated.
Foot pedal controller
Foot pedal controller could adjust the sewing speed,
pressing down for fast sewing
Assemble/ Disassemble Presser Foot
Disassemble Presser foot
Raise needle bar to top position with rotation hand wheel, lift
presser foot and press lever at the rear of presser foot handle,
and then disassemble presser foot.
Assemble presser foot
Rightly put presser foot with its pin facing the handle groove,
put down the lifting lever, and then presser foot will be fixed at
its position.
P-6