3. Over a waste bin, press the dust release button to open the bottom cover and
expel any dust, dirt and debris. Wipe clean only, do not submerge in water. (Fig.7)
Fig. 7
Cleaning the filter:
1. Remove the dust container from the main body.
2. Twist the lid of the dust container anit-clockwise to open (Fig.8)
Fig. 8
3. Remove the sponge inlet filter from the top of the dust container. (Fig. 9)
Fig. 9
4. Rinse thoroughly under clean fresh water. Do not use soap or other cleaning
agents.
5. Allow filter to dry naturally before placing back into the vacuum. Do not place
on radiators or use additional appliances, such as a hair dryer, to dry the filter.
Doing so may cause the filter to warp or for other irreparable damage to occur.
22