topmark KAYA Instrucciones De Uso página 14

ASSEMBLING/USING
Check if all spare parts are in the box (see page 2).
Note that colour pictures and stroller accessories on this product in this instruction
manual may vary from that of the product that you have purchased.
If one or more of the above mentioned spare parts are missing or broken, please
contact the store where you bought the product, before using.
WARNING
Please keep all packaging material away from babies and children, to
EN
prevent suffocation.
How to install the balance bike
.
1. Insert in the handle bar and make sure it is fitted in place (1a) . Insert the front
wheel to the tricycle chassis (1b). Pull firmly on the handle bar and front wheel
to be sure it is securely attached to the chassis.
WARNING: The maximum bearing weight for the handle of tricycle is
0.5kg.
How to transform to a tricycle
2. Press down the button and pull out the pedals.
3. Insert the pedals directly into the front wheel sockets and make sure they are in place
when you hear a "click".
4. Press down the bottom button and take rear wheels apart.
5. Pull up the button and rotate the rear wheel outward at the same time.
How to adjust handle angle
. The angle of handlebar can be adjusted accordingly to the baby's needs. When adjust
6
the angle forward, pull up the button and push forward the handlebar at the same
time, and then do remember to pull up the handlebar a little bit until you heard "click",
which means this position locked. If you want to adjust the angle back straight, just pull
up the button and pull back the handlebar, it will be ok.
How to adjust the seat height
7. Loosen the screw with a screwdriver to adjust the height, then tighten the screws.
Make sure it's tight!
14