Symbols - Black Max BM11ACTIL Manual Del Operador

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
 If the cultivator strikes a foreign object, follow these steps:
• Release the switch trigger and wait until the unit comes
to a complete stop.
• Disconnect the cultivator from the power supply.
• Thoroughly inspect the cultivator for any damage.
• Repair any damage before restarting and continuing to
operate the cultivator.
 Do not lift up or hold the cultivator above the ground when
operating, which can result in loss of control and possible
serious personal injury. Only operate the cultivator in
accordance with the operating instructions provided in
this operator's manual.
 Keep guards in place and in working order. Never operate
the machine without proper guards, plates, or other safety
protective devices in place.
 Check Damaged Parts - Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
IMPORTANT SAFETY INSTRUCTIONS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
 Disconnect the plug from power source when not in use,
 Maintain Appliance With Care - Keep cutting edge sharp
 Save these instructions. Refer to them frequently and use

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
Page 4 — English
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by
an authorized service center unless indicated elsewhere
in this manual.
before servicing, and when changing accessories.
and clean for best performance and to reduce the risk of
injury. Follow instructions for lubricating and changing
accessories. Inspect appliance cord periodically, and
if damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free from oil
and grease.
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.