Teac T-R460 Manual Del Usuario página 12

O P E R AT I O N S
HOW TO PRESET DAILY
The ON and/or OFF time can be preset for daily use.
Before presetting DAILY, make sure the power is off.
DAILY Presetting
1. Press the DAILY button. ("DAILY ON --:--" will be
displayed for you to set the ON time.)
2. Set the "hour(--)" you want by pressing the TUNING
button, and then press the NEXT button. "Minute"
signal will blink.
After you set the "minute(--)" you want in the same
way as for "hour", the display will show "DAILY OFF
--:--" which indicates the OFF time. Set the OFF time
in the same way as you set the "ON" time.
3. Select the input source you want to listen to by
pressing the TUNING button after the NEXT button.
Each press of the TUNING button displays the input
source in the following sequence (TUNER ∑ CD ∑
TAPE ∑ TUNER-R ∑ TUNER).
● TUNER: When you want to listen to the broadcast
at your desired time.
To allow this function to work properly, connect
the tuner to a TEAC "UR" Remote Control System
compatible amplifier (A-R600) which has a Remote
Control terminal on its rear panel.
● CD: When you want to listen to a compact disc at
your desired time.
● TAPE: When you want to listen to a cassette tape
at a desired time.
● TUNER-R: When you want to record a cassette
tape at a desired time while listening to a
broadcast.
Then "REC" will appear on the display.
4. Press the DAILY button or NEXT button to complete
presetting. Then, the display will return to the
previous status before presetting was performed.
5. Press the TIMER button to turn on the timer.
Notes:
● If the timer is off, "DAILY" or "DAILY 'REC'" will not be
displayed and the timer function does not work.
● If you want to correct preset time of DAILY, preset
again from the beginning.
● If you turn off the power intentionally before the
"OFF" time, the DAILY presets will be cancelled.
SPECIAL MEMORY FUNCTION
This system has two memory functions such as "Most
recent" and "Back-up".
● "Most-recent" memory function
This function memorizes an FM or AM (MW)
broadcast station listened to when power was last
turned off, and searches for that broadcast station
automatically when you turn on power later.
● "Back-up" memory function
This function conserves the already preset station
memories, and "Most-recent" memory function, even
in the event of a cut-off of power supply, as when the
plug is pulled out of the wall outlet, for 3 days.
WHEN TO USE RESET SWITCH
1. When this system is subjected to an electrical shock.
2. When the power is irregular.
In the above cases, function buttons may not often
operate or the display may operate wrongly. In these
cases, try the following:
— Rear panel —
Press the RESET switch lightly once or twice with a
pencil or a ballpoint pen.
_ 12 _
RESET SWITCH