Technical Specifications - SE Electronics DynaCaster DCM 3 Manual Del Usuario

Technical specifications

Capsule
Voice coil
Magnet
Polar Pattern
Frequency range
Sensitivity
Powering
Current consumption
Electrical impedance
Recommended load impedance
Connectivity
Dimensions
Weight
Support
In case you have any questions about your new sE product, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
In the event that your new sE product is operating improperly, it must be returned to us as the manufacturer
or to a destinated vendor for any service or repair. For the fastest and most direct service, please contact
your dealer first. If authorized service is required, it will be arranged by that dealer:
http://www.seelectronics.com/dealers
If you are experiencing difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Frequency Response
DynaCaster DCM 3
Dynamic
Copper
Neodymium
Cardioid
40 Hz - 18 kHz
2.5 / (-52 dBV)
-
-
600 Ohms
> 1k Ohms
3-pin male XLR connector
158 x 86 x 62 mm (L x W x H)
6.22 x 3.39 x 2.44 in. (L x W x H)
512 g / 18.06 oz.
5
DynaCaster DCM 6
2.5 / 79 mV/Pa (-52 / -22 dBV)
+48V Phantom power
3.1 mA
600 / 135 Ohms
518 g / 18.27 oz.
Polar Pattern