Publicidad
Idiomas disponibles
Idiomas disponibles
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL
Improper Log Type
Operator Zone/Correct
Operating Position
Incorrect Operating Position
V
Volts
A
Amperes
Hz
Hertz
Alternating Current
SYMBOLS
NAME
Only split dry, cylindrically shaped logs that are cut squarely on
each end. Never attempt to split wet logs or logs that are curved
or are cut at angles on either end.
Always be positioned in the right rear area as facing the log split-
ter controls.
Never stand or kneel directly behind the ram when operating.
Voltage
Current
Frequency (cycles per second)
Type of current
Page 6 — English
DESIGNATION/EXPLANATION
Publicidad
