Care And Cleaning; Safety Precautions - Polk Monitor XT10 Guia De Inicio Rapido

Important product information
WARNING: Listen carefully
Polk Audio loudspeakers are capable of playing at
extremely high volume levels, which could cause
serious or permanent hearing damage. Polk Audio
accepts no liability for hearing loss, bodily injury, or
property damage resulting from the misuse of its
products. Keep these guidelines in mind and always
use good judgment when controlling volume:
Limit prolonged exposure to volume levels that exceed
85 decibels (dB). For more information about safe
volume levels, please review the Occupational Health
and Safety Administration (OSHA) guidelines at
www.osha.gov/.

Care and cleaning

The only thing you should ever need to do to your
speakers is dust them occasionally. Never apply
any abrasive or solvent-based cleaner or any harsh
detergent.

Safety precautions

1. CAUTION! To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to
dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on
apparatus.
2. Read these instructions.
3. Keep these instructions.
4. Heed all warnings.
5. Follow all instructions.
6. Do not use this apparatus near water.
7. Clean only with a dry cloth.
8. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
9. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
10. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
11. Place the subwoofer close to your AC power
socket for easy plugging and unplugging.
12. Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit
from the apparatus.
13. Use only attachments/accessories specified by
the manufacturer.
14. Unplug the apparatus during lightning storms or
when unused for long periods of time.
15. Refer all servicing to qualified personnel. Servicing
is required when the apparatus has been
damaged in any way, such as when power supply
cord or plug is damaged, when liquid has been
spilled or objects have fallen into the apparatus,
when the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
16. WARNING! The mains plug/appliance coupler is
used as the disconnect device. The disconnect
device shall remain readily operable.
17. CAUTION! To completely disconnect this product
from the mains, disconnect the plug from the
wall socket outlet. The mains plug is used to
completely interrupt the power supply to the unit
and must be within easy access by the user.
18. The equipment can be used at a maximum
ambient temperature of 95 °F (35 °C).
19. The product is designed for altitudes up to and
including 2000m above sea level.
20. CAUTION! To completely disconnect this product
from the mains, disconnect the plug from the
wall socket outlet. The mains plug is used to
completely interrupt the power supply to the unit
and must be within easy access by the user.
21. CAUTION! Neutral fusing. After fuse is blown,
there is still a risk of electrical shock. Disconnect
power cord before service. When replacing, use a
fuse with the same current rating (China/Europe:
T 1AL 250V; Japan: T 2AL 250V).
Notes on use
• Avoid high temperatures.
• Allow for sufficient heat dispersion when installed
in a rack.
• Handle the power cord carefully.
• WARNING! Hold the plug when unplugging the
cord.
• Keep the unit free from moisture, water, and dust.
• Unplug the power cord when not using the unit for
long periods of time.
• Do not obstruct the ventilation holes.
• Do not let foreign objects into the unit.
• Do not let insecticides, benzene, and thinner come
in contact with the unit.
• WARNING! Never disassemble or modify the unit in
any way.
• Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths or curtains.
• Naked flame sources such as lit candles should
not be placed on the unit.
• Do not expose the unit to dripping or splashing
fluids.
• Do not place objects filled with liquids, such as
vases, on the unit.
• WARNING! Do not handle the mains cord with wet
hands.
• WARNING! When the switch is in the OFF
(STANDBY) position, the equipment is not
completely switched off from MAINS.
• The equipment shall be installed near the
power supply so that the power supply is easily
accessible.
• CAUTION! HOT SURFACE.
• DO NOT TOUCH.
• The rear metal panel over the internal heat
sink may become hot when operating this
product continuously. Do not touch hot areas,
especially around the "Hot surface" mark and the
rear metal panel.