Cleaning And Storage - Dörr FB-300 Manual De Instrucciones

08 | ORIENTATION/MOUNTING
08.1 Motion Detectors
The maximum detecting range of PIR sensor is up to 12 m and 70° in
an open environment. To avoid false alarm, kindly note that no flut-
tering leaves/branches etc. are near to the motion detectors. For an
optimum detection of objects, we recommend to mount the motion
detectors in a height of min. 0,3 m – max. 2,00 m above the ground
(e.g. to a tree).
NOTE
The higher you mount the motion detectors, the lower the detec-
tion range. Best results can be achieved with a mounting height of
about 0,8 m.
To mount the motion detectors, use the supplied mounting straps.
Alternatively you can screw on the motion sensors through the moun-
ting jack (16).
08.2 Receiver
With the belt clip (09) the receiver can be attached to the belt or clot-
hing. Alternatively the receiver should be placed protected from rain
within a distance of approx. 300 m to the motion detectors.
09 | OPTIONAL MOTION DETECTORS
You can supplement your FB-300 Kit with additional DÖRR wireless
detectors FB-300S (up to 5 motion detectors can be combined). Visit
our web shop www.doerr-outdoor.de.
Item-No. Model
DÖRR Wireless Detector FB-300S No. 3
204805-A
204805-B DÖRR Wireless Detector FB-300S No. 4
204805-C DÖRR Wireless Detector FB-300S No. 5
13
10 | CONNECT FURTHER MOTION DETECTORS
11 |

CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device.
We recommend a soft, slightly damp microfiber cloth to clean the
outer parts of the device. Turn off the device and remove batteries
before cleaning. Store the device in a dust-free, dry and cool place.
This device is not a toy – keep it out of reach of children. Keep
away from pets.
OFF
doerr-outdoor.de