Descargar Imprimir esta página

Control Panel - Pur Line MISTY T Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
EN
ATTENTION:
- Pay attention to the indication of the minimum and maximum level in the tank.
- Be sure to use clean tap water.
- After adding water, do not place the water tank diagonally, on its side or upside down to prevent
water from entering the appliance.
- The water tank cannot be immersed in water because there is a circuit board at the bottom.
- Gently insert the water tank into the body, push it all the way in and tighten it securely to avoid
bad contact of the water tank.
- One end of the adapter is connected to the DC port of the product, and another end is connected
to the power supply, and the product is in standby mode.

CONTROL PANEL:

4
3
2
1
In standby mode, the power indicator light is on.
1. ON: Press the power button, the appliance starts running with high speed by default, the
corresponding indicator light is lit.
2. SPEED: Touch the speed button to switch to low speed, the corresponding indicator light is on.
3. MIST: When the product is running, press the mist button, the corresponding indicator light is
on. Press again to stop misting.
4. OSCILLATION: When the product is running, press the oscillation button, the corresponding
indicator light turns on, and the device activates the 90° wide angle oscillation function. Press
again to deactivate the swing function.
When the device is in operation, if there is a shortage of water, the device stops misting, and the
fan continues to run. The power light will continue to flash and the appliance will emit a "Beep" to
indicate the lack of water. After filling the water tank, put it back into the appliance, the power light
stops flashing, press the power button to continue to operate the appliance.
When the appliance is running, if the water tank is removed, the misting function will stop, the
corresponding indicator light turns off. Replace the tank and press the misting button to restart
the misting function, and the corresponding indicator light turns on.
After the misting fan has been operating for a certain period of time, the water in the water tank
10

Publicidad

loading