REIS ™ bt earbuds
EN
Before first use, remove the protective film from the bottom of the
earphones.
SWITCH ON First remove one earphone from the charging
_01
cradle, after 2 seconds remove the other.
PAIRING When removed, a red and blue light alternately flashes.
_02
Wait for one of them to blink only in blue –this earphone is the one
that takes the left position– at this time it is possible to pair with the
device.
VOLUME AND TRACK CONTROL The earphone which adopts the
_03
left position, serves to lower the volume and to backward tracks. The
earphone that adopts the right position, serves to increase the
volume and forward tracks. Keep your finger on the earphone to
increase or decrease the volume. Double tap the earphone to
backward or forward tracks.
*Earphone adapters under the black foam
To access
FULL OPERATION
MANUAL
scan the QR code.
www.thonet-vander.de