Before Use; Switching The Device On; Grinding - Silvercrest HG01100 Instrucciones De Utilización Y De Seguridad

Before use

Check the device for damage before every use.
Place the device on a level, non-slip surface.

Switching the device on

Plug the mains plug into a socket that has been professionally
installed.
Select the desired grinding function 1, 2 or 3 by turning the func-
tional and protective cover
position 2 „Serrated edge knives", the respective symbol will point
at the arrow on grinder opening. The functional and protective
cover will lock into place at the dot following the symbol.
6
Press and hold the on/off switch
The grindstone
leased.

Grinding

Note: Do not insert the blades until the grindstone
For even results, repeatedly draw knives and scissors away from
the shaft in even movements, do not return or move back and forth.
To prevent premature grindstone
and do not apply pressure.
When grinding knives and scissors, be sure to hold the blade at
an acute angle to the grindstone
the opening). The blade may otherwise be damaged.
until it locks into place. In e.g.
6
will rotate until the on/off switch
5
to start the grinding process.
8
5
wear, only grind clean blades
5
(as indicated by the shape of
5
is re-
8
is turning.
GB/MT 47