Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GROUNDED PLUG: As a safety feature, this appliance is equipped with a grounded plug,
which will only fit into a three-prong outlet. Do not attempt to defeat this safety feature.
Improper connection of the grounding conductor may result in the risk of electric shock.
Consult a qualified electrician if you are in doubt as to whether the outlet is properly
grounded.
SPECIAL INSTRUCTIONS: A short power supply cord is provided to reduce the risk of
becoming entangled in or tripping over a longer cord.
AN EXTENSION CORD MAY BE USED IF CARE IS EXERCISED IN THEIR USE:
- Minimize the risk of overheating by using the shortest UL or ETL listed cord possible.
- The marked electrical rating must be at least as great as that of the product.
- Never use a single extension cord to operate more than one appliance.
- If the product is of the grounding type, the extension cord must be a grounding-type 3-wire
cord.
- Arrange the longer cord so that it will not drape over a countertop or tabletop where it can
be tripped over, snagged, or pulled on unintentionally (especially by children).
DO NOT alter the plug. DO NOT attempt to defeat the safety purpose of the polarized plug.
BEFORE ASSEMBLY
Before assembling the product, thoroughly clean the Base as instructed in
Steps 3-5 of the "Care and Maintenance" section.
TO ASSEMBLE
CAUTION: Ensure the Temperature Control Dial is set to "OFF," the Power Cord is unplugged
from the electrical outlet, and the product has thoroughly cooled before attaching or
detaching the Temperature Control Dial. Do not use multi-pot without handles attached.
1.
Place left handle onto mounting studs underneath (side of) multi-pot.
2.
Use screwdriver to attach 2 screws through holes in the handle into the multi-pot.
3.
Place right handle onto mounting studs underneath (side of) multi-pot.
4.
Use screwdriver to attach 2 screws through holes in the handle into multi-pot
CAUTION: Overtightening can result in stripping of screws or nuts or cracking of handle
or feet.
5.
Attach the knob to the lid by aligning the hole in the knob with the hole in the lid, and
then secure with bolt and washer. NOTE: Do not over-tighten the bolt.
4
CARE AND MAINTENANCE
WARNING: Ensure the multi-pot is unplugged from the electrical outlet and allow it to cool
before handling or cleaning it.
CLEANING:
1.
Ensure that the appliance is completely cooled before cleaning. Remove the
temperature control dial from the socket before cleaning the product.
2.
Drain excess oil or wipe the interior surface of the base with a paper towel.
3.
Thoroughly wipe the lid and base of the product with a hot, soapy cloth/sponge,
ensuring that water or soap does not enter the socket.
CAUTION: After use, do not pour cold water onto the product, as the sudden
temperature change may damage the product or create a burn hazard.
NOTE: Do not place the multi-pot or cord in a dishwasher.
NOTE: Do not use bleach or abrasive cleansers/scouring pads to clean the product, as
they may damage the non-stick finish.
4.
Rinse with hot water and thoroughly dry.
5.
Ensure the socket and electrical pins are completely dry before storing or resuming use.
6.
If cleaning the temperature control dial is necessary, wipe with a soft, damp cloth
sponge and dry thoroughly. NOTE: Do not immerse in water or place temperature
control dial in a dishwasher.
5
Publicidad
Tabla de contenido
