OPERATING INSTRUCTION
EN
CORDLESS KETTLE C280B/C280C
GENERAL DESCRIPTION
1. Spout + net filter
2. Opening lid
3. Lid release handle
4. Handle
5. On/off switch
6. Water level indicator
7. Base
TECHNICAL DATA
-
power: 1850-2200W
-
mains voltage: 220-240V, ~50-60Hz
-
1.7 litre capacity
Cordless kettle C280B/C280C is for boiling water. It is possible to boil 0.5 – 1.7 litre of water in
the kettle.
The kettle base (7) must be put on a flat and dry surface. In the base there is some space for an
excess cord. It is important for the cord to be led from the base (7) through a special groove so
that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and then
empty the kettle.
The kettle can be filled with water directly through the spout (1) or after opening the lid (2).
In order to open the lid (2) you must press the button (3) (photo 1). The lid should be closed
by pressing until you hear it snapp. The kettle must not be filled up when on the base. The
minimum level of boiling water is 0.5 l. The maximum water level (1.7 l) is marked on the
indicator (6). The kettle starts working after putting the switch (5) in the position 'I'. The kettle
working is signalled by the control lamp. The kettle switches off automatically after the water
has boiled. You can stop heating water at any time by putting the switch (5) in the position '0'.
10
2
1
7
3
4
5
6