Power: 800 W
Feed tube diameter: 75 mm
750 ml juice jug
1.6 litre pulp tank
Revolutions per minute: 18000
Accessories dishwasher washable
Stainless steel filter
2 speeds
Protection against overheating
Locking system
Anti-drip nozzle
Product Size: 392 x 322 x 209
3.
ASSEMBLY
To assemble the product, please follow the instructions carefully:
1. Place the waste container (6) on the back of the body (7).
2. Insert the juice outlet (4) into the body of the device (7).
3. Add the filter (3) in the upper part of the juice output (4).
4. Position the lid (2) over the filter and juice outlet.
5. Insert the thrust element (1) into the hole in the cover (2).
6. Raise the handle (5) until it is placed in the side holes of the cover (2).
7. Place the juice container (8) in the outlet and cover with the lid.
4.
INSTRUCTIONS FOR USE
BEFORE USE
1. Make sure that all packaging has been removed from the product.
2. Before using the product for the first time, clean the parts that will come into
contact with the food as described in the cleaning section.
3. Assemble all parts of the appliance correctly before plugging in the blender. This
appliance is equipped with a safety system so that it will not function if the parts
are not properly assembled.
USE
1. Completely unwind the cable before plugging it in.
2. Assemble the appliance correctly as described in the corresponding paragraph.
3. Connect the device to the mains and switch on the power supply.
4. Add the food you want to the XXL orifice and switch on the appliance in position
1 or 2, depending on whether you want lower or higher power.
5. Press on the pushing element slowly, not exerting pressure greater than 1 kg. If
too much force is exerted, the amount of liquefied juice will be reduced.
POWER JUICER 800 W
11