Product Usage; Assembly/Disassembly - VALBERG OPTISILENCE Instrucciones De Uso

B

Product usage

Assembly/Disassembly

To assemble
To install a dust bag, press the dust cup release latch and lift up the front cover.
Insert the dust bag into the corresponding housing, then slide the cardboard top into the
slot holder.
Insert the flexible hose into the hose-connecting inlet on the unit's body and then turn it
clockwise to secure it in place.
To disassemble the hose, turn it anticlockwise to release and remove it.
Insert the metal tube into the flexible hose. To adjust the length of the metal tube, push
the pushbutton backwards and extend the tube.
Fit one of the following attachments by inserting it into the metal tube or flexible hose.
• Floor brush for various types of flooring.
Press the pedal to retract the brush (for carpets) or extend it (for smooth floors).
−
• Mini turbo brush for furniture
• Round brush for animal hair
• Crevice tool for crevices, recesses and edges
• Long crevice tool for hard-to-reach places
• The round brush and crevice tool are stored in the attachment compartment.
• Lift the attachment compartment lid (O) to open it.
Insert the plug into the mains socket.
• The power cable can be extended up to the yellow mark. If the red mark is visible, then
you have pulled the cable out too far.
To disassemble
• Make sure the unit is turned off and disconnect the plug from the mains socket.
• Detach the brush, crevice tools and tubes by twisting to pull them apart.
Press the cable rewind button to store the cable away.
Insert the floor brush into the back of the unit for easy storage.
16 EN