Safety Instructions - Party Light & Sound FUNLED Manual De Instrucciones

EXPLANATION OF SYMBOLS
The unit complies with UK standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Contents of the carton:
⠗ 1 x PAR light bar
⠗ 1x User Manual
⠗ 1x remote control
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts
are present and have been received in good condition. Notify the freight company immediately and retain
packing material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs
of mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the
factory, it is important that the fixture be returned in the original factory box and packing.

Safety Instructions

Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
⠗ Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also re-
ceives this instruction booklet.
⠗ Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the fixture.
⠗
This product is intended for indoor use only!
⠗ To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
⠗ The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces.
Be sure that no ventilation slots are blocked.
⠗ Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than
this.
⠗ In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type of spare parts.
⠗ Make sure the power cord is never crimped or damaged.
⠗ The light source is not replaceable. If it is faulty, the whole unit must be discarded.
⠗ Avoid direct eye exposure to the light source while it is on.
OPERATION
Push the switch on the rear panel to auto or sound controlled operation.
When the fixture is not in use, push the switch to the OFF position.
REMOTE CONTROL
Insertion of the battery in the remote control
Pull out the battery compartment and insert a button cell (CR2025 3V) with the positive
side facing upwards. Push in the battery compartment until it clicks into place.
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate col-
lection points for recycling.
ATTENTION:
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of children.
WARNING:
The supplied remote control contains a button cell. In case of ingestion, it might cause serious internal burns
within only 2 hours that might lead to death. If you are in doubt whether the batteries have been swallowed or introduced
into any other part of the body, contact immediately a doctor.
2
INSTRUCTION MANUAL
EN