Publicidad
Idiomas disponibles
Idiomas disponibles
S T E P 1
S e c u r e V a n i t y t o W a l l
1. Place the vanity base in the desired location
2. Using the stud finder and marker, locate and mark the studs
behind the wall
Important: if the studs do not line up for your vanity, wood blocking
can be installed between studs
3. Ensure the vanity base is level. Adjust floor levelers at bottom of foot
Note: adjustments are sometimes needed due to uneven flooring
4. Drill two pilot holes through the back of the top rail that line up
with the wall stud. Then, achor the vanity to the wall.
Locate wall studs and
use this rail to secure
vanity to the wall
1 (833) 66 BEMMA
customercare@bemmadesign.com
Publicidad
