DeLOCK 90096 Manual Del Usuario página 3

English
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI Express slot.
4. Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
5.
Use a screw to attach the card to the housing.
6.
Connect a SATA power cable of your power supply to the PCI Express card.
7. Reattach the housing and connect the power cord to the AC adapter.
8. Switch on your computer.
Driver Installation
1.
When the installation of the device is finished, the driver will be automatically
installed after you restart the computer.
2. You can now start to use the device.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 10/2022
-3-