Publicidad
Idiomas disponibles
Idiomas disponibles
Screws
2mm
Screws
ST4.8
WARNING
Electrocution hazard! Failure to install the screws or bracket in
accordance with these instructions may result in electrical hazards.
2
Drill 4 holes with a diameter
of 10 mm into the ceiling and
then insert the dowels into
the holes.
3
Adjust the 4 screws on the
bracket so that they protrude
2 mm.
4
Pull the power cable through
the hole in the bracket and fi x
the bracket with four screws
ST4.8.
EN
35
Publicidad
