Publicidad
Idiomas disponibles
Idiomas disponibles
USE INSTRUCTIONS.
- Unwind the entire cable completely.
- Never place the iron on cloths or materials that can cause fires.
- When the iron can be used safely, plug in the electricity.
1. LED Display.
- The selected temperature appears on the screen.
- While it is heating, the values appear until they reach the selected fixed value.
2. Closure lock tab.
- To close the iron and keep it closed, keep the iron closed with your hand and
push the tab in. Now you can release it and it stays closed.
- To open it again, press the iron slightly as if you wanted to close it and
pull the tab out. Now the iron opens when you release it.
3. Key (+).
- Button to raise the temperature up to a maximum of 230ºC.
- Each pulsation goes up 10 in 10ºC.
4. On/Off Key.
- Button on and off.
5. Key (-).
- Button to lower the temperature to a minimum of 120ºC.
- Each pulsation goes down from 10 to 10ºC.
CLEANING AND MAINTENANCE.
- Before cleaning, the iron must be unplugged and completely cold.
- Never put the iron under the tap or wet it.
- Do not use abrasive cleaning products, it can damage the material of the device.
- Clean with a slightly damp cloth (never wet) and then dry.
- Clean all the holes, also removing traces of hair, if any.
- Dry well with absorbent kitchen paper.
- Never wind the cable around the iron. Bends can damage the cable.
- Store the iron if possible in its box until its next use.
- Store in a dry and dust-free area.
Publicidad
