USE INSTRUCTIONS.
- Unwind the entire cable completely.
- Open the support buckle and put it on a straight and firm table or countertop.
- Never place the curling iron on cloths or materials that can cause fires.
- When the curling iron is safely positioned, plug in the electricity.
CLEANING AND MAINTENANCE.
- Before cleaning, the curling iron must be unplugged and completely cold.
- Never put the curling iron under the tap or wet it.
- Do not use abrasive cleaning products, it can damage the material of the device.
- Clean with a slightly damp cloth (never wet) and then dry.
- Open the tweezers and clean all the holes, also removing traces of hair, if any.
- Dry well with absorbent kitchen paper.
- Never wind the cable around the curling iron. Bends can damage the cable.
- Store the curling iron if possible in its box until its next use.
- Store in a dry and dust-free area.
SPECIFICATIONS.
Voltage: 110-240V 50/60HZ
Power: 60W
Maximum temperature: 200℃
5 temperature controls 130-150-170-180-200 ℃ with LED light indicator
Clamp size: 28mm.
Heating (Resistor Type): PTC
360 degree swivel PVC cable, length 1.8m.
1. With this button you can switch on the device,
You can also select the desired temperature,
and turn off the device.
2. Temperature control panel.
3. Temperature and its indicator led.
OPERATION.
- To turn on, press the button (1).
- The led of the first temperature will light up.
- Then keep pressing until you select the
desired temperature.
- The red led of the selected temperature flashes
while it is heating up to temperature.
- Once it stays on steadily, it will be hot.
- When use is finished, turn off and unplug.
- To turn off, press the same button until turning off.