Thulos TH-BY12 Manual De Instrucciones página 9

USE INSTRUCTIONS.
- The area to be treated must be very clean and completely dry.
- The head has 3 blades, 2 cut-only sides and a central shave (close).
- The machine has two types of cut.
- Cut without shaving.
For cut without shave you will need to insert the cutting guide comb.
This cutting mode leaves the hair short but does not cut all the hair.
- Cut with shave.
For cut with shaving, you should do it without putting on the cutting guide comb.
Slide the machine in a straight position by lightly pressing the blade to the skin.
With the other hand, keep the skin stretched and run the machine against the grain.
- Make several passes until you achieve the desired result.
- Once its use is finished, clean and store.
WARNINGS.
- The first few times you use the machine, your skin may be slightly irritated. This is normal.
By using the machine regularly, your skin adapts and stops getting irritated.
- If the area to be shaved has very long hair, it is necessary to cut the hair first using
the guide comb. Once the hair is short you can proceed to shave without the guide comb.
CLEANING AND MAINTENANCE.
- Always clean and grease the machine after each use.
- Never put the machine under the tap or wet it.
- Remove the cutting comb and remove any remaining hair with the cleaning brush.
- Remove the blade head and remove any remaining hair with the cleaning brush.
- Put the knife head back on the machine.
- Put the machine into operation and pour 2 or 3 drops of lubricating oil on the blades.
- Wait a few seconds for the blades to lubricate and turn off the machine.
- Put the guide comb to act as a protector for the blades while it is stored.
- Clean the outside with a soft cloth.
- Store the machine if possible in its box, in a dry and dust-free area.
SPECIFICATIONS.
- Battery operated female shaver.
- Removable epilator head.
- It works with 2 AAA type batteries (not included).
- Guide comb to cut the length of the hair.
- Engine: 6500-7500rpm.