the machine.
Advice:
·Do not overreach. Keep the
balance at all times, to always be
EN
sure of the footing on slopes. Walk,
never run.
·Do not connect a damaged cord
to the supply or touch a damaged
cord before it is disconnected from
the supply for the reason that
damaged cords can lead to contact
with live parts.
·Keep extension cords away from
moving hazardous parts to avoid
damages to the cords which can
lead to contact with live parts.
Warning!
Do
hazardous parts before the
machine is disconnected from the
mains and the moving hazardous
parts have come to a complete
stop.
Never operate the machine with
defective guards or shields, or
without safety devices, or if the
cord is damaged or worn.
Recommendations:
Avoid using the machine in bad
weather conditions especially when
SAFETY INSTRUCTIONS
not
touch
moving
there is a risk of lightning.
MAINTENANCE
Before and after each use, check
the product and accessories (or
attachments) for wear and damage.
If required, exchange them for new
ones as described in this instruction
manual. Observe the technical
requirements.
Be aware of the danger of moving
hazardous parts.
The following part of this product may
be replaced by the consumer. Spare
parts are available at an authorised
dealer or through our customer
service.
Description
Model no. or Specification
Blade
8231-545203
WARNING! For your safety, it
is required that the plug attached to
this product is always connected to an
extension cord! The extension cord
must be suitable for outdoor use with
sockets protected against water
splashing! Ensure the extension cord
is of the proper size and type for your
product (≥ 1.5mm
less rubber insulated, ordinary
46
), which shall not
2