Publicidad
Idiomas disponibles
Idiomas disponibles
17. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
18. Pick up the Back Panel (J) and align the pre-drilled holes against the upper long edge with the pilot holes on
the back of Top Panel (A). Attach the Back Panel (J) in place using the provided 15 mm Washer Head
Screws (5).
NOTE: We recommend attaching back panel with washer head screws at the corners first.
Assembly Instructions
5
J
18
⑤ x 12
Publicidad
