Better Homes and Gardens BH10-084-001-16 Instrucciones De Montaje página 4

B
Hex Nut
(8 used in this step)
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Bench Top (A) upside down on a level and protective surface.
3. Attach 4 Legs (B) to the apron corners of the Bench Top (A) by inserting the hanger bolts pre-attached
on the Legs through the pre-drilled holes on the corner blocks. Fit the Flat Washer (3), Lock Washer (2)
and Hex Nut (1) onto each Hanger Bolt, then securely tighten the nuts with the provided open wrench.
4. Stand the unit upright and place it at your desired location.
Assembly Instructions
3
①
DO NOT fully tighten the nuts or bolts initially until all the nuts or bolts are
A
Lock Washer
(8 used in this step)
②
4
B
Flat Washer
(8 used in this step)
③