Whalen SPUS-FBPS-GM Instrucciones De Montaje página 5

NOTE: DO NOT fully tighten all cam locks and bolts until you finish assembling all parts. Once
assembled, go back and fully tighten all cam locks and bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panel (H) using a
Phillips screwdriver.
3. Insert the Small Wood Dowels (4) into the inner holes on the Drawer Back Panel (I) at both end and
attach it between the Drawer Side Panels (J and K) with four 30 mm Screws (6).
Assembly Instructions
H
4
K
I
Grooves line up with each
other and face inward
5
J
4
3