Hoover H-PURIFIER 700 HHP75CAH011 Manual De Usuario página 7

2. PREPARING YOUR H-PURIFIER
2.1 INSTALL THE FILTER [Fig. 1]
Before using your H-Purifier product you will need to remove the Filter from its protective packaging:
• Remove the Air Inlet Cover from your product, grip the two Air Inlet Cover Handles and pull from the product. [Fig. 1a]
• Remove the plug from the Transportation Location and release the cord from the Storage Hook. [Fig. 1b]
• Unlock the Filter Release Switch. [Fig. 1c]
• Remove the Filter from your product and remove the outer packaging. [Fig. 1d,e]
• Refit the Filter into your product. [Fig. 1f]
• Lock the Filter Release Switch. [Fig. 1g]
• Refit the Air Inlet Cover to your product. [Fig. 1h]
Fig. 1
2.2 INSTALL THE DIFFUSER BOTTLE [Fig. 2]
To prepare your H-Purifier product for the Diffuser function:
Remove the Diffuser Cover from the product. [Fig. 2a]
•
• Remove the Diffuser Unit from the Diffuser Cover. [Fig. 2b]
Remove the bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 2c]
•
• Preserve the cap for future storage use.
• Tightly screw the bottle on the Diffuser unit. [Fig. 2d]
Refit the Diffuser Unit into the Diffuser Cover. [Fig. 2e]
•
• Refit the Diffuser Cover into the product. [Fig. 2f]
Fig. 2
2.3 PREPARE THE HUMIDIFIER [Fig. 3]
To prepare your H-Purifier product for the Humidifier function:
• Remove the Tank Housing from the product. [Fig. 3a]
• Remove the Tank Assembly from the Tank Housing. [Fig. 3b]
• Before the first use clean all the parts with a dry soft cloth.
• Fill the tank through the Water Tank Inlet with distilled water until it reaches the MAX line indicated on the tank. [Fig. 3c]
Refit the Tank Assembly into Tank Assembly Housing. [Fig. 3d]
•
Refit the Tank Assembly Housing into your Product. [Fig. 3e]
•
Fig. 3
GB
7