Publicidad
Idiomas disponibles
Idiomas disponibles
MULTIMETER (VOLTAGE AND CURRENT):
2
3
Displays DC output voltage and current values through the display and LED
indicators. You can switch between three information display modes with a
single press of the MODE/PROG button:
▪ Only VOLTAGE
▪ Only CURRENT
▪ Alternate VOLTAGE
When a mode is selected, the LED for the function will light up. In alternate
mode, both LEDs will light up (VOLTAGE/CURRENT) for 2s.
The data reported by the multimeter function has an accuracy margin
as indicated:
Voltage tolerance: ±1.5%.
Current tolerance: ±5% from 5% of the nominal value.
FULL CHARGE:
4
When lit (red LED), it indicates that the batteries are fully charged.
Once full charge is reached, it is not necessary to turn off the source.
Its smart charging system will keep the output voltage at 13.8V,
keeping the batteries always fully charged without causing damage
to them.
3
2
and CURRENT
3
2
21
Publicidad
