Hama Everyday Instrucciones De Uso página 6

• If no entries are made for around 25
seconds, settings mode is automatically
ended.
5.4.2 Activating/deactivating the alarm
function
• Brie y press the ALM-SET button (11),
then press the  button (7) to activate
/ deactivate the alarm clock. When the
alarm time is active, the corresponding
symbol appears in the display.
5.4.3 Stopping the alarm / Snooze
function
• If the alarm clock is triggered, an alarm
signal sounds. The frequency of the alarm
signal increases as the duration of the
alarm increases (speed alarm).
• Press any button (except the SNOOZE/
LIGHT button) to stop the alarm.
• Otherwise, it ends automatically after
2 minutes.
Note - Snooze function
During the alarm signal, press the
SNOOZE- LIGHT button (8) to activate
the snooze function. Zz starts to ash on
the display. The alarm signal is interrupted
for 5 minutes and then triggered again.
6. Care and maintenance
Only clean this product using a lint-free,
slightly damp cloth and do not use any harsh
cleaners. Ensure that no water is able to
enter the product.
4
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability
and provides no warranty for damage
resulting from improper installation/
mounting, improper use of the product
or from failure to observe the operating
instructions and/or safety notes.
8. Technical data
Alarm clock
Power supply
4.5V
3 x AAA battery