Publicidad
Idiomas disponibles
Idiomas disponibles
Pedestal fan assembly
1.
Unpack the fan and remove all the parts from the package.
2.
Insert the lower tube (16) into the hole in the base (17) with the
gasket (18) under the base, then tighten the base clockwise with
the L-shaped screw (19).
3. Insert the upper tube (14) into the centre of the lower tube (16), and
align the bolt in the screw holes. Tighten the bolt (15).
4. Insert the fan head into the middle of the upper tube (14) and align
the screw hole, screw in and tighten the bolt (12).
5. Use the rear grille nut (6) to attach the rear grille (7) to the fan head,
then fit the rear blades (5) and front blades (4) with the rear grille
nut (6) Use the locking nut built into the front blades (4) to hold the
blades (4 and 5) in place.
6. To attach the front grille (1) to the rear grille (7), use the grille
attachment (2) to hold them together carefully, then secure with
the screw provided.
Intermediate height assembly
The steps are the same as for the standing fan mode, explained above,
except for removing the upper tube (14) and screwing the fan head to
the lower tube (16).
Steps to follow as a desktop fan
The steps are the same as for the pedestal fan assembly, except for
removing both the upper (14) and lower tubes (16) and screwing the
fan head to the base.
21
|
Publicidad
