Publicidad
Idiomas disponibles
Idiomas disponibles
Switch
for
hand
shower & faucet
Switch
for
cold
water
Switch for hot water
Installation
1. Open the cartons to check whether the bathtub has defects, and the availability of fittings.
2. Put the bathtub into a pre-determined place, than adjust the screw rod to make the bathtub at
a horizontal position stabled.
Lead the drainpipe to the preformed floor drain. Then set the bathtub tube into the right place.
Doesn't extruding bending, chocking drain pipe, make sure the bailing smoothly.
3. The bathtub has the faucet; the hot and cold water supply device should be located in a
hiding place of bathtub body, through horse to connect with hot and cold water connection.
4. According to the sign of hot and cold water, to adjust suitable water temperature.
(Temperature should be controlled not exceeding 70°C)
Installation Steps
1. Open the package, and find a small box. Install the three switches, hand shower
and faucet on bathtub.
Indicator
Action
Turn anti-clockwise
Turn clockwise
Turn anti-clockwise
Turn clockwise
Turn anti-clockwise
Turn clockwise
Function
Hand shower
Faucet
Turn on
Turn off
Turn on
Turn off
2
Photos
blue color
red color
Publicidad
