CAPRIZZE KAITO Manual Del Usuario página 6

USE
•Unroll the power cord completely.
•Check that the tension in force in the country where you are corresponds to that indicated on
the apparatus.
•Connect the apparatus in a correct socket-outlet, (and connected to the ground if the unit is
Class I), to avoid any danger.
•Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
•Stand the appliance on a table or flat surface.
•The item must not be left unattended when it is connected to main supply.
•The item is not to be used, if it has been dropped & if there are visible signs of damage or if
it is leaking.
•Unroll the power cord completely.
•Check that the tension in force in the country where you are corresponds to that indicated on
the apparatus.
•Connect the apparatus in a correct socket-outlet, (and connected to the ground if the unit is
Class I), to avoid any danger.
•Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
•Stand the appliance on a table or flat surface.
•The item must not be left unattended when it is connected to main supply.
•The item is not to be used, if it has been dropped & if there are visible signs of damage or if
it is leaking.
•Never modify the appliance in anyway.
•Do not use or keep this product outside when it is raining.
•Certain parts of the appliance can get hot. Do not touch them, as you may burn yourself.
•Place the bread slices in the slot (for the French bread, cut a loaf shorter than the slot, then cut
it in two pieces along its length.). Your appliance is provided to receive French bread, but also
pieces of toast or other bread slices if their thickness and their length are shorter than the slot.
•Press down the bread carriage handle until it stops (in the same time, the grid inside the slot
will tighten around the bread in order to keep it away from the heating wires). Then release the
pressure and the handle will stay in the lower position, which means that the heating process
has begun. If the handle comes up immediately, check if the appliance is plugged in as it blocks
when the unit is plugged in.
•You can adjust the browning intensity to obtain a more or less toasted bread by positioning the
browning control selector to one of the degrees marked from 1 to 6. Therefore you only have to
turn clockwise to increase the intensity, and anticlockwise to decrease it. The higher the number
is, the more toasted the bread will be.
•When you use the burn warmer on the toaster, you need select the browning control below 2.
•To use complementary functions :
After pressing down the bread carriage handle, push on :
-The reheat button which allows you to reheat bread or to toasted bread.
-The defrost button which allows you to toast the bread that has been frozen beforehand.
•During the functioning, if you think that the bread is toasted enough or for another reason, you
can break the heating process, simply by pressing the cancel button "STOP".
•Always unplug the appliance after use and let it cool down before handling or storing it.
6