Descargar Imprimir esta página

Specified Conditions Of Use; Safety Instructions; Charge The Battery; Maintenance And Care - Würth WLH 1.2 Traducción Del Manual De Instrucciones De Servicio Original

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Specified Conditions of
Use
The lamp is used as intended if it is used
exclusively to illuminate ordinary work
areas and if the specifications stated in the
technical data are observed. Any other use
or use beyond this is not permitted.
The appliance must not be used,:
in areas with harmful gases, oils, acids,
radiation, etc.
in potentially explosive atmospheres
This lamp complies with all relevant norms
and standards in connection with CE
conformity. If the lamp is modified, com-
pliance with these standards is no longer
guaranteed.
It is forbidden to make any changes to the
device. Such changes can lead to personal
injury and malfunctions.

Safety instructions

Warning against hot
surfaces!
The lamp can become hot in the
area of light emission. Therefore,
keep a distance of at least
Do not cover the light emission.
Do not place the lamp with the light
emission pointing downwards.
Do not open the lamp.
There is a risk of a short circuit. Repairs
to the lamp may only be carried out by
persons authorised and trained for this
purpose. Contact your Würth branch.
A damaged lamp or charger may
no longer be used and may only be
replaced by the manufacturer.

Charge the battery

Charge before first use. Charging
time: 6-8 h
Fully charge the fixture before storing it
for an extended period of time.
Switch off the light during charging.
Plug the power supply unit into the
lamp.
During the charging process, the LED of
the light switches to red.
The charging process is completed as
soon as the LED of the light switches
to green.

Maintenance and care

Visual inspection before starting
work
The lamp is maintenance-free. Nevertheless,
the lamp and accessories must be checked
for external damage before each use.
If damage is visible, the lamp must
not be used. It must be repaired or
disposed of by a commissioned and trained
person. Please contact your Wurth branch.
Cleaning
Switch off the lamp and disconnect the
mains plug before carrying out any clea-
ning work. To clean the lamp, wipe with a
clean, soft cloth. Remove stubborn dirt with
a damp cloth and a standard household
cleaner. Never use cleaning agents contai-
ning alcohol, solvents or abrasives as these
will damage the housing.
Storage
Fully charge the fixture before storing it for
an extended period of time.
9

Publicidad

loading

Este manual también es adecuado para:

0827 940 112