Brandson Equipment 305647 Manual Del Usuario página 22

6. Common problems
• Pins don't snap into place - When plugging in the cable, apply a little more
force until the pins are properly connected to the charging station or
electric vehicle.
• Charging settings on the electric vehicle - Make sure that no timers or other
settings are turned on in the vehicle.
• The vehicle is locked - The vehicle must be unlocked and switched off to
start charging.
• Plugging in another cable - This cable must be plugged directly into a type
2 socket.
7. Cleaning
Caution! Pull out the power plug from the vehicle and the charging station before
starting to clean! The cable must not be connected!
Use a dry cloth for cleaning. The device must never be immersed in water for
cleaning or come into contact with water. This could lead to electric shock or fire!
8. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
hence please use it only in dry surroundings. Protect it from high humidity, water
and snow. Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the device for any damage
before using it. The device should not be used if it was subject to impact or has
been damaged in some other manner. Please comply with the local regulations and
restrictions. Do not use the device for purposes other than those described in the
user manual. This product is not a toy.
22
English