Programming Delay Brew; Adjustable Warming Plate; Care & Maintenance; Cleaning After A Brew - Ninja CE200 Serie Manual Del Propietário

PREPARING & USING YOUR
NINJA® COFFEE BREWER – CONT.

PROGRAMMING DELAY BREW

NOTE: The unit must remain on for the
Delay Brew function to work. DO NOT
power off or unplug the unit after setting
Delay Brew.
1 Plug the unit in and turn it on by pressing
the power button
2 After filling the water reservoir and
adding ground coffee to the brew
basket, be sure the reservoir and brew
basket are securely in place. Place the
empty carafe under the brew basket.
3 Press DELAY BREW. The clock will
flash "12:00" or the last time that was
set. Use the hour (H) and minute (M)
buttons to set the time you would like
the Delay Brew to begin. The AM or PM
indicator will illuminate on the left side of
the display as you are setting the time.
4 Select the brew style, and your selection
will illuminate. If brewing fewer than
4 cups, press SMALL BATCH.
5 Once you have set the time and brew
style, press DELAY BREW to activate, or
wait 5 seconds for Delay Brew to lock in.
When activated, the unit will beep, and
DELAY BREW will remain illuminated.
6 To cancel, press DELAY BREW
or the Power button. Changing the
brew style while Delay Brew is set or
starting another brew will cancel the
programmed Delay Brew.
10 1-877-646-5288

ADJUSTABLE WARMING PLATE

The warming plate will turn on once the
brew has started. Press the STAY WARM
button after the brew to turn off the
warming plate (Fig� 9). You can turn
the warming plate back on by pressing
STAY WARM again. Wait until surface
has cooled completely before touching.
NOTE: The unit will continue to brew if
additional water is added to the reservoir,
DO NOT add more water when using the STAY
WARM function.
You can program the warming plate to stay
on for up to 4 hours.
1 Press and hold STAY WARM until the
clock flashes, displaying how long the
warming plate is currently set to stay on.
2
Quickly press the hour (H) or minute (M)
button to adjust the time up to 4 hours.
The warming plate is automatically
programmed to stay on for 2:00 hours.
3 To lock in the new duration, press
STAY WARM again, or wait 5 seconds
for it to lock in automatically.
CARE & MAINTENANCE

CLEANING AFTER A BREW

1
After the unit has cooled, remove the
filter holder from the brew basket. If
using a paper filter, empty the used
grounds and discard it. If using
the permanent filter, wash it thoroughly
with soap and warm water or place on
the top rack of the dishwasher.
2 Empty the water reservoir and
hand-wash or place in the dishwasher
with opening facing downwards.
We recommend thoroughly washing
the water reservoir weekly.
NOTE: For best results, we recommend
rinsing the reservoir after brewing and refilling
with fresh water the next time you brew.
3 We recommend cleaning your carafe
with warm, soapy water, or placing it
on the top rack of your dishwasher.
If you want to clean the carafe more
thoroughly, we recommend using a soft
foam brush. DO NOT use a wire brush.
NOTE: The glass carafe, brew-through lid,
removable filter holder, permanent filter,
water reservoir, water reservoir lid, and
scoop are dishwasher safe.
4 After the coffee maker has cooled, wipe
down the main unit, showerhead, and
water reservoir shelf with a cloth and
warm water. DO NOT immerse the coffee
maker in water.
TO CLEAN AND DESCALE YOUR
NINJA COFFEE BREWER:
The clean function allows you to clean
your unit whenever you would like. As a
guideline, we suggest running a clean cycle
if it starts taking longer than 12-15 minutes
to brew a full carafe of coffee.
NOTE: Make sure the SMALL BATCH
button is not selected/illuminated.
1 Set the empty carafe beneath the
brew basket.
2 Use a descaling solution specifically
formulated for coffeemaker cleaning
and follow the directions on the package.
Fill the water reservoir up to, but not
exceeding, the 12-Cup Line (60 fl. oz.).
OR
Add 16 oz. of white vinegar to the water
reservoir, then fill the rest of the reservoir
with water up to, but not exceeding, the
12-Cup Line (60 fl. oz.).
IMPORTANT: Use only white vinegar.
3 Once the water reservoir is filled with
your cleaning solution or vinegar mixture,
press the CLEAN button. The clean cycle
takes approximately 25–35 minutes. To
cancel the clean cycle, press the CLEAN
button again or press the Power button.
4 The unit will beep when the clean cycle
successfully completes.
5 Empty the contents of the carafe and
place it back under the brew basket.
Clean the water reservoir with warm,
soapy water to remove any cleaning
solution that could affect the flavor of
your coffee.
6 Refill the reservoir with fresh water up to,
but not exceeding, the 12-Cup Line and
set the empty carafe beneath the brew
basket.
7 Flush the system by running a
12-Cup Classic Brew cycle with
water only. After the cycle is
complete, discard the water and
thoroughly clean the carafe.
NOTE: The clean cycle takes
approximately 25–35 minutes. If you
cancel the clean cycle, your machine
will not be properly descaled.
NOTE: Running a water-only clean cycle
will not descale the brewer properly.
NOTE: Hard water will cause scale buildup
faster than soft water and the brewer will
indicate it needs cleaning more often.
ninjakitchen.com 11