Publicidad
Idiomas disponibles
Idiomas disponibles
- Open / Close button: connect12V and Open / Close, as desired.
-Safety devices: connect the signal of return of the device to the board
betweenthe terminal of COMMON and IN.
ON Dead man switch(at Common, Opening and Closing
terminals).
OFF Limit switches (at Common, Opening and Closing
terminals).
ON To startopening maneuver, is necessary to hold pressed
the transmitter's button or the PROG switch.
Ifthebuttonisnotheld, maneuverwill stop.
OFF Opening is set as direct order operation.
ON To start the closing maneuver, hold pressed the
transmitter's button or the PROG button.Ifthebuttonisnotheld,
maneuverwill stop.
OFF Closing is set as direct order operation.
ON Photocell is disabled (It is not neccessary to
with this position.
OFF Photobeam is enabled. This configuration allows the
programmation of optional automatic closure.
DS152B SHUTTER 2.0
bridge the security input). Automatic closure is not available
PROGRAMMATION
DIP SET UP
4 PHOTOBEAM
17
Publicidad
